Pearl Basics

What Is Pearl Luster?

The Japanese idea of teri, and how to see it for yourself

Put two white pearls side by side under the same lamp. One looks like a nicely polished bead. The other seems to glow from the inside, with a soft blush of pink around the reflection of the light. Most people notice the difference in a second, even if they cannot say what it is.

In Japan, the pearl trade has a word for it: teri (照り).

Teri is light that comes back to you from inside the pearl, not just a shine on its surface.

In this guide, Miseki Jewelry, a Japanese-owned jewelry store founded in San Francisco in 1967, explains what teri is, where it comes from, why some pearls have so much more of it, and how you can see it with your own eyes. Our facts come from Japanese sources: the Pearl Standard of the Japan Pearl Promotion Society, the Pearl Dictionary edited by Dr. Hiroshi Komatsu, and research that Japan’s Pearl Science Laboratory has published in its magazine, Margarita.

Quick Answer: Teri is the Japanese pearl trade’s word for a pearl’s luster and glow. It is more than surface shine. Light enters the nacre, reflects from more than a thousand microscopic crystal layers, and those reflections add up into brightness and soft color, such as the pink blush of a fine Akoya pearl. The more even and orderly the layers, the stronger the teri. Japan’s Pearl Science Laboratory calls teri the most important quality of a pearl. The Japan Pearl Promotion Society adds that deep teri also needs enough nacre. To see teri, place a pearl on a white cloth under one light and look for a crisp reflection with a ring of soft color around it.

What Does Teri Mean?

Teri comes from the Japanese verb teru, “to shine.” When Japanese pearl farmers, buyers, and jewelers say a pearl has good teri, they mean it has that bright, deep glow that makes a pearl look alive.

Japan’s pearl experts treat it as the heart of a pearl’s beauty. The Pearl Standard of the Japan Pearl Promotion Society describes teri as a combined quality that brings together gloss and translucency, and that comes not only from the surface but also from light reflected inside the pearl, with interference. The Pearl Dictionary goes further: it calls teri the essence of a pearl, and says that understanding teri and learning to measure it was the biggest advance in pearl science since 2002.

Dr. Hiroshi Komatsu, who founded Japan’s Pearl Science Laboratory, put it simply in a 2017 lecture: pearls became one of humanity’s oldest gems not because of their shape or their lack of blemishes, but because of their teri.

Is teri the same thing as luster?

In English, teri is usually translated as luster, and that is close enough for everyday use. But Japanese researchers draw a finer line.

The Pearl Science Laboratory separates a pearl’s shine into two parts. Surface gloss is the mirror-like shine of the outer surface; in Japanese it is called tsuya. Teri is the light that comes from within: brightness together with interference color. Their own short definition is “brilliance with color, and color with brilliance.”

This difference matters. Dr. Komatsu pointed out that when Japan’s national pearl inspection system began in 1952, it treated teri and gloss as the same thing, and he called that a mistake that shaped pearl knowledge for decades. The Pearl Standard makes the same point from the buyer’s side: polishing a pearl to a mirror finish improves only the reflection from its surface. It does not create the deep, soft teri a pearl is born with.

Where Does a Pearl’s Glow Come From?

The answer is hidden inside the nacre, the material that makes up a pearl. Nacre is built from extremely thin layers of aragonite, a crystal form of calcium carbonate, separated by even thinner sheets of protein called conchiolin. According to the Pearl Science Laboratory, calcium carbonate makes up more than 90 percent of a pearl. The Pearl Standard describes nacre as more than a thousand of these crystal plates stacked one on top of another.

How teri works: light reflects from many thin crystal layers inside the pearl Light inLight back outCrystal layersA pearl(square = zoomed in)
How teri works: light reflects from many thin crystal layers inside the pearl, and the reflections add up. Illustration: Miseki Jewelry.

Here is the key. Each crystal layer is only about 0.3 to 0.5 micrometers thick. That is roughly the same scale as the wavelengths of visible light. When light enters a pearl, part of it reflects at each layer. Because the layers are so thin and so regular, the reflections line up and strengthen one another. Physicists call this interference, and it is the same effect that paints colors on a soap bubble.

The Pearl Science Laboratory found a neat way to show how much the layer thickness matters. In the shell of the Ikecho freshwater mussel, the parts that shimmer with color had crystal layers about 340 nanometers thick. The cloudy white parts had layers about 1,250 nanometers thick, and showed no color at all. In pearls that do show interference color, the layers measured about 300 to 500 nanometers.

Did you know?

The laboratory also found that once each layer reaches about 0.5 micrometers or more, both the color and the brightness of a pearl become weaker. Thicker layers are not better. The magic only happens when the layers are thin enough to play with light.

Why Do Some Pearls Glow More Than Others?

If every pearl is made of these layers, why do some pearls glow and others look flat? The Pearl Science Laboratory has spent years answering this question with an electron microscope, and the answer is surprisingly simple: it depends on how even the layers are.

Even crystal layers give stronger teri than uneven, warped layers Stronger teribright, with colorWeaker teriflatter, little colorEven layersabout 0.33–0.38 µmUneven, warped layersabout 0.31–0.45 µm
Even crystal layers give stronger teri than uneven, warped layers. Layer measurements from the Pearl Science Laboratory (2025). Illustration: Miseki Jewelry.

In a 2009 study, the laboratory cut white Akoya pearls in half and measured their crystal layers. The pearls with the strongest interference had the most uniform layer thickness. When layers are uneven, each one reflects a slightly different color, and the colors mix and cancel one another out, drifting toward plain white. The pearl may still shine, but its teri is weaker.

In 2016, the laboratory looked closer still. Pearls with weak teri more often had layers that were warped, branching, or fused, which scatter light instead of lining it up.

In 2025, it compared two pink Akoya pearls, one with strong teri and one with medium teri. In the outermost 50 micrometers of the strong pearl, the crystal layers were 0.33 to 0.38 micrometers thick and stacked neatly. In the medium pearl, they ranged from 0.31 to 0.45 micrometers, and the stacking was slightly distorted. To the eye, the difference showed up exactly where you would expect: in the interference colors.

The Pearl Standard sums it up the same way. Large, dense, plate-shaped crystals stacked in a regular order give a pearl its deep teri. Nacre can be thick and still lack teri, if the crystals are too thick, too small, or arranged unevenly.

Where Do the Pink and Green Colors Come From?

A pearl shows two kinds of color at the same time. Japanese pearl science keeps them carefully apart:

  • Body color comes from pigments and organic matter inside the pearl. In Akoya pearls, cream, yellow, and blue tones are body colors.
  • Interference color comes from the layered structure itself, through the interference you read about above. It is color made of light, not of pigment.

Here is a beautiful fact. According to the Pearl Science Laboratory, the nacre of the Akoya oyster contains no red pigment. So the rosy pink that a fine Akoya pearl shows on its own does not come from pigment. It is interference color, made by layers about a third of a micrometer thick. The laboratory even linked this to Marco Polo, who described Japan’s pearls as rose-colored, and suggested that he was describing exactly this kind of pearl.

The color you see depends on the average thickness of the layers. The laboratory sorts white Akoya pearls into three interference-color types:

Interference color type Average layer thickness* What it looks like
R (pink) About 0.33 µm A rosy pink glow
RG (pink and green) About 0.36 µm Pink with touches of green
G (green) About 0.44 µm A cooler, greenish shimmer

*Measured in the outer 10 micrometers of three white Akoya pearls. Pearl Science Laboratory, 2009.

The laboratory also showed that a pearl produces two sets of interference colors at once: one in reflected light and one in light that passes through the nacre, and the two are complementary colors. On a fine white Akoya pearl, the colors gather around the reflection of the light source. On a Tahitian pearl, they tend to appear around the edge of the pearl instead.

Good to Know

Most white Akoya pearls are bleached and then very lightly toned with a pink dye after the harvest. In Japanese this toning is called chōshoku, and the Pearl Standard describes it as a long-standing Japanese technique for evening out the color of a strand. Bleaching itself tends to bring out the pearl’s own pink interference color, and toning helps the pearls in a strand match.

The difference between the two pinks matters over time. The Pearl Science Laboratory notes that a toning dye can slowly fade with long exposure to heat and light, while the Pearl Dictionary explains that interference color does not fade. Read more in How Akoya Pearls Are Processed After the Harvest and Treated Pearls: What Sellers Should Tell You.

Does Thicker Nacre Mean Better Teri?

Not by itself. This is one of the most common misunderstandings about pearls, and Japan’s two main references explain it from two angles that fit together.

The Pearl Standard calls maki, the thickness of the nacre, the most important quality factor of all, mainly because it decides how long a pearl will last. It also says that without enough nacre, a pearl can never show deep, rich teri.

The Pearl Dictionary adds the other half. It calls the idea that “thicker nacre means better teri” a mistake, because teri is decided by the thickness and orderliness of the crystal layers, not by the total depth of the nacre. When nacre is thinner than about 0.2 mm, light reflected from the bead underneath dilutes the interference colors. But in experiments, once the nacre passed about 0.3 mm, people could no longer judge its thickness by eye, and pearls with strong teri simply looked as if they had thicker nacre.

In short

Enough nacre is the entry ticket. The quality of the layers decides how brightly a pearl glows. A pearl with thin nacre will not have deep teri, but thick nacre alone does not guarantee it.

For Akoya pearls, the Pearl Science Laboratory counts nacre of 0.4 mm or more as thick. You can read more about nacre thickness in What Makes Akoya Pearls Shine: Teri and Maki.

When Does a Pearl Get Its Teri?

A pearl is built from the inside out. The layers closest to the bead are made soon after the oyster is nucleated, and the layers at the surface are made just before the harvest. Since teri is decided mostly near the surface, the last weeks in the sea matter most.

In Japan, those last weeks happen in winter, and for a good reason. According to the Pearl Standard, when the sea cools in winter, the Akoya oyster lays down large, dense, orderly crystals, and the pearl’s teri improves. Pearl farmers call this final layer keshō-maki, the “makeup coat,” and Akoya pearls are harvested in winter because this is when their nacre shows its finest teri and interference colors.

The Pearl Science Laboratory has measured this, too:

  • Winter improves the pearls. In a study published in 2021, oysters nucleated at the same time were harvested month by month from September 2019 to March 2020. The oysters’ energy reserves and the brightness of their pearls both rose toward winter and fell afterward. Pearls harvested in February and March more often had rough surfaces with disordered growth patterns.
  • The pink layers sit near the surface. In fine pink Akoya pearls, layers about 0.33 micrometers thick ran from the surface down to about 150 micrometers, and the layers became thicker deeper inside. The laboratory linked the outer layers to the cold-water weeks before the harvest.
  • Farmers help, too. Akoya pearls are generally harvested in December and January. Before the harvest, farmers often hold off on cleaning the oysters, lower them deeper in the water, or move them to different waters, all to help the teri.

You can follow the whole farming year in How Akoya Pearls Are Grown.

How Do Experts Judge Teri?

For most of pearl history, teri has been judged by trained eyes, and in the Japanese trade it still is. The Pearl Science Laboratory has spent decades trying to put numbers on it, and its work shows both how far science has come and why experienced eyes still matter.

What is the “aurora effect”?

Dr. Komatsu discovered that when a pearl is placed directly on a diffuse light source, such as a light box, its interference colors appear far more vividly than in ordinary light. He named this the aurora effect. The laboratory built a viewing device around it and uses it to grade teri.

How does the laboratory grade teri?

The Pearl Science Laboratory grades Akoya pearls on five factors: teri, blemishes, surface, shape, and nacre, with teri at the center of the system. To judge teri, its graders compare each pearl with sets of master pearls whose interference colors are vivid (1.0 point), clear (0.7), faint (0.4), or absent (0). There are separate master sets for the pink, pink-green, and green types.

Can a machine measure teri?

Partly. The laboratory measures two things: the sharpness and brightness of the light source reflected on the pearl, and the hue, saturation, and lightness of its interference colors. In 2014 it completed software that scores the interference colors from photographs.

In a 2010 comparison, experienced graders sorted pearls into seven levels of teri. The instruments could separate about six levels using interference color, and about five using brightness alone. The laboratory’s own conclusion was honest: teri can be measured within a range, but the overall judgment of a skilled eye is still better, because people see brightness, color, blemishes, and shape all at once.

Japan’s pearl industry is careful here, too. The Japan Pearl Promotion Society does not recognize grading reports for pearls, so in the trade, teri is still judged by people who handle pearls every day. You can read more about these organizations in Who Protects Japanese Pearl Quality?

How Can You See Teri for Yourself?

You do not need a laboratory. You need a white cloth, one light, and a little patience.

How to look at teri: one light above, pearl on a white cloth white cloth121Is the reflection of the light crisp and bright?2Is there a soft ring of pink or green around it?
How to look at teri: one light above, pearl on a white cloth. Illustration: Miseki Jewelry.

Step 1: Set up one light and a white cloth

Lay the pearls on a plain white cloth and use a single light above them, such as a desk lamp or a window. One light makes the reflection easy to read.

Step 2: Look at the reflection of the light

Find the small reflection of the lamp on the pearl. The Pearl Science Laboratory describes teri partly as the sharpness and brightness of this reflected image. A crisp, bright reflection with clean edges is a sign of strong teri. A blurry, dim reflection suggests weaker teri or a dulled surface.

Step 3: Look for the ring of color around it

Now look just around that reflection. On a white Akoya pearl with good teri, you will see a soft halo of color, often pink, sometimes with green. The laboratory explains that when a pearl sits on a white cloth with light from above, the colors around the reflection are interference colors made by light that passes through the nacre. No color at all usually means weak teri.

Step 4: Compare pearls side by side

Teri is easiest to judge by comparison. Line up several pearls, or roll a strand slowly across the cloth. In a necklace, the Pearl Dictionary says matching teri is especially important: a strand whose pearls glow alike looks calm and complete.

Miseki Tip

Be a little wary of pearls that look dazzling only under strong store spotlights. Ask to see them in softer light too, on a white surface. Good teri still shows there as a deep glow with soft color, as if the light is coming from inside the pearl.

Can Teri Fade, and Can It Come Back?

A pearl’s teri is made by its layers, so it lasts as long as the surface layers stay healthy. The most common problem the Pearl Science Laboratory sees is a pearl that has lost its brightness because sweat, skin oils, and cosmetics have dissolved its very outer surface. The damage is usually only about 1 to 2 micrometers deep, but that tiny roughness scatters light and dulls the teri.

The good news is that this kind of dullness can usually be repaired. Because only the outermost layers are damaged, a specialist can remove a few of them with very gentle polishing, revealing the clean layers underneath. In one experiment, the laboratory dissolved the surface of seven Akoya pearls on purpose and then polished them ten times. It found no change in size beyond its measuring error of ±0.02 mm, and no change in weight. Each layer, after all, is only 0.3 to 0.5 micrometers thick.

Not everything can be reversed, though. The laboratory notes that pearls that have yellowed from long exposure to heat and light are very difficult to restore. That is why prevention matters most.

How to protect your pearls’ teri

  • Put pearls on after perfume, hairspray, and makeup.
  • Wipe them with a soft, dry cloth after every wear, before you put them away.
  • Keep them away from heat, strong sunlight, and long display under hot lights.
  • Do not wear them in the bath, a hot spring, or a pool.

The full routine is in How to Care for Pearls.

If your pearls look dull, please bring them to us in San Francisco’s Japantown. We will look at them with you and tell you honestly whether the teri can come back.

Frequently Asked Questions About Pearl Luster

What does teri mean?

Teri (照り) is the Japanese pearl trade’s word for a pearl’s luster and glow. It comes from the verb teru, “to shine,” and describes light that comes from inside the pearl, not just shine on its surface.

Is teri the same as luster?

In everyday English, yes, luster is the usual translation. Japanese pearl scientists define teri more narrowly: brightness together with interference color produced inside the nacre, as opposed to surface gloss alone.

Why is my Akoya pearl pink?

Usually for two reasons together. The Akoya oyster’s nacre has no red pigment, so the pink glow of a fine Akoya pearl is interference color made by its thin crystal layers. Most white Akoya pearls are also very lightly toned with a pink dye after bleaching, a traditional Japanese technique for matching a strand. A good jeweler can tell you whether a pearl has been toned.

Does polishing give a pearl teri?

No. According to the Pearl Standard, polishing a pearl to a mirror finish improves only the reflection from its surface. Teri comes from the structure of the nacre itself. Gentle polishing by a specialist can, however, remove a damaged surface layer and reveal the teri underneath.

Do pearls with thicker nacre have better teri?

Not automatically. A pearl needs enough nacre to show deep teri, but beyond that, teri depends on how thin, even, and orderly the crystal layers are. The Pearl Dictionary calls “thicker is always better” a misunderstanding.

Why are Japanese Akoya pearls harvested in winter?

Cold winter water makes the Akoya oyster lay down large, dense, orderly crystals at the pearl’s surface. Farmers call this final layer the “makeup coat,” and it gives the pearl its finest teri and interference colors.

Can teri be measured?

Partly. Japan’s Pearl Science Laboratory measures the brightness of the reflected light and analyzes the interference colors, and it grades teri against master pearls. In its own tests, though, skilled human eyes still made finer distinctions than the instruments.

My pearls look dull. Are they ruined?

Usually not. Dullness most often comes from sweat and cosmetics dissolving the outermost layers, only about 1 to 2 micrometers deep. A specialist can often restore the teri by removing those few damaged layers. Yellowing from heat and light, however, is very difficult to reverse.

About Miseki Jewelry

Founded in San Francisco in 1967, Miseki Jewelry is a Japanese-owned jewelry store in the city’s Japantown and a San Francisco Legacy Business. Entrusted from one generation of owners to the next, we take special pride in Akoya pearls and the pearl-culturing craft developed in Japan, and we celebrate every pearl the world’s waters produce.

Our mission is simple: to carry Japan’s pearl culture forward and share the beauty of pearls with America and the world.

▾Sources and Image Credits (18 sources)

Image Credits

  • All illustrations: Miseki Jewelry. Layer measurements shown in the illustrations are from the Pearl Science Laboratory studies listed below.

Sources

Original sources are in Japanese, summarized and translated by Miseki Jewelry.

  • Japan Pearl Promotion Society, Pearl Standard 2025 (Japanese edition, Shinju Shishin 2025): Chapter 1 on the structure of nacre; Chapter 3, section 5.4, on bleaching and toning; Chapter 4, section 3, on quality factors, maki, teri, and color; Chapter 5 on grading reports.
  • Hiroshi Komatsu (supervising ed.), Pearl Science Laboratory, Shinju Jiten: Shinju, Sono Shirarezaru Shōuchū (Pearl Dictionary), Senken Shimbun, 2015: introduction, the chapter on quality (teri, color, nacre thickness, matching), and the glossary.
  • Pearl Science Laboratory, “A physical and chemical study of teri as a quality factor of pearls,” special lecture by Hiroshi Komatsu at the Gemmological Society of Japan, Margarita (2017). Link
  • Pearl Science Laboratory, “Comparing brightness measurement, reflected interference color, and visual grading of Akoya teri,” Margarita (2010). Link
  • Pearl Science Laboratory, “The correlation between teri and crystal layers in pearls,” Margarita (2009). Link
  • Pearl Science Laboratory, “Why some nacre shows no interference color,” Margarita (2011). Link
  • Pearl Science Laboratory, “The mechanism behind strong and weak teri,” Margarita (2015). Link
  • Pearl Science Laboratory, “Approaches to improving teri,” by Sayaka Nanjo, Margarita (2016). Link
  • Pearl Science Laboratory, “The well-lustered pearls once called ‘rose-colored’,” by Sayaka Nanjo, Margarita (2019). Link
  • Pearl Science Laboratory, “Interference color and crystal layers (laboratory notes),” Margarita (2025). Link
  • Pearl Science Laboratory, “Harvest month, mother oysters, and pearl quality,” by Ryo Yamamoto, Margarita (2021). Link
  • Pearl Science Laboratory, “Structural analysis of pearls,” by Junko Yazaki, Margarita (2020). Link
  • Pearl Science Laboratory, “Grading Akoya pearls: practical methods and issues,” Margarita (2012). Link
  • Pearl Science Laboratory, “Measuring teri by color analysis of interference colors,” Margarita (2014). Link
  • Pearl Science Laboratory, “What I learned from 50 years of pearl research, part 2,” Margarita (2023). Link
  • Pearl Science Laboratory, “What I learned from 50 years of pearl research, part 5,” Margarita (2023). Link
  • Pearl Science Laboratory, “Pearl Claim Chart 1 (first published 2009),” Margarita (2024). Link
  • Pearl Science Laboratory, “Pearl Claim Chart 76: does micro-polishing make pearls smaller? (first published 2015),” Margarita (2025). Link
Back to blog

Authentic Japanese Pearl Restringing

  • Entrust pearls to Japanese experts for superior restringing.
  • Utilize tradition-rich techniques for unmatched quality.
  • Fast same-day service for items up to 18 inches.
  • Unique blend embodies Japan's legendary pearl heritage.
More Info

How to care for your Pearls: A Complete Guide

Pearls are delicate treasures that need proper care to maintain their natural glow. At Miseki Jewelry, with expertise since 1967, we provide the best tips and services to protect your pearls.

More Info